French stretch ceiling is made of heavy-duty pvc film (PVC) with a thickness 0.17 mm, which is stretched on the aluminum frame. If the ceiling area exceeds 50 square meters, the film is attached to the additional being installed the ribs. The standard width of film is usually 1.5, 1.7, 2.3 meter, the joints are unavoidable, which are compared to the factory. On painted ceilings, while visible to a very fine line interface, on the frosted canvases she hardly noticeable. The ceiling area of 20 sq.m. allowable percentage of sagging canvas - 1% per 1 sq.m. Texture stretch ceiling has several advantages: the outer layer of the film is covered by a lighter layer of Teflon (and therefore on ceiling does not form water condensate) that allows you to easily clean the ceiling from dirt and dust.
You just need to wipe the ceiling with a soft cloth with any detergent. Scratching with a brush in no case be - Set in the stretch film can break (strength, 13-17 MPa) stretch ceiling withstand a certain temperature: Maximum temperature: +50 C, minimum:-5C. In case of violation of these parameters is possible loss of the original form (the gap, changes in color fabrics, warp, etc.). The ceiling has a polymeric structure and can withstand water pressure up to 100 liters per 1 sq.m. (In case of leaks). If this happens, you will need to ask our experts who troubleshoot the fault. Because the ceiling is made of pvc film, it can not be disturbed, especially piercing-cutting subjects. If there was a gap, place the strain should seal the paint or paper tape and call our specialists.